Acs ACR101 SIMicro (CCID) User Manual

ACR101 SIMicro (CCID) Smart Card and Micro-SD Reader Reference Manual Subject to change without prior notice [email protected] www.acs.com.hk

Document Title Here Document Title Here Document Title Here ACR101 PC/SC Memory Card Access Version 1.0 Page 10 of 19 [email protected] www.acs.com.hk

Offset Field Size Value Description 0 bMessageType 1 62h 1 dwLength 4 00000000h Size of extra bytes of this message 2 bSlot 1 Identifies the slo

7.1.1.4. PC_to_RDR_XfrBlock Transfer data block to the ICC. Offset Field Size Value Description 0 bMessageType 1 6Fh 1 dwLength 4 Size of abData

7.1.1.7. PC_to_RDR_SetParameters Set slot parameters. Offset Field Size Value Description 0 bMessageType 1 61h 1 dwLength 4 Size of extra bytes

Protocol Data Structure for Protocol T=1 (dwLength=00000007h) Offset Field Size Value Description 10 bmFindexDindex 1 B7-4 – FI – Index into the

7.1.2.2. RDR_to_PC_SlotStatus This message is sent by the smart card reader in response to PC_to_RDR_IccPowerOff, PC_to_RDR_GetSlotStatus, PC_to_RDR

7.1.2.3. RDR_to_PC_Parameters This message is sent by the smart card reader in response to PC_to_RDR_GetParameters, PC_to_RDR_ResetParameters and PC

FIRMWARE 10 bytes data for firmware version MAX_C The maximum number of command data bytes. MAX_R The maximum number of data bytes that can be re

Appendix A. Supported Card Types The following table is a list of the card types returned by GET_READER_INFORMATION corresponding with the respectiv

Document Title Here Document Title Here Document Title Here ACR101 PC/SC Memory Card Access Version 1.0 Page 19 of 19 [email protected] www.acs.com.hk

Table of Contents 1.0. Introduction ...

1.0. Introduction The ACR101 SIMicro (CCID) is a combination of a smart card reader and a Micro-SD card slot in a compact USB token which provides

2.0. Features  USB combo device – works as smart card reader and mass storage  USB 2.0 Hi-Speed Interface  Bus-powered – no need for separate

3.0. System Block Diagram The USB Hub Controller is the communication interface between the PC and the MCU of the smart card and flash memory via USB

4.0. Power Supply The ACR101 (CCID) requires a voltage of 5V DC, 100mA regulated power supply. It gets the power supply from the PC. 4.1. Status L

5.0. Smart Card Interface The interface between the ACR101 (CCID) and the inserted smart card follows the specifications of ISO7816-3. 5.1. Smart

6.0. USB Interface The ACR101 (CCID) is connected to a computer through a USB following the USB standard. 6.1. Communication Parameters The ACR101 (

7.0. Communication Protocol ACR101 (CCID) interfaces with the host via USB connection. It is a compounded device consisting of two interfaces: Chi